Matahari Services
Coimbatore, Tamil Nadu
GST No. 33AGGPR4427G1ZG
TrustSEAL Verified
Call 0804607036779% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand | Delta |
| Model Number | ECMA-CA0807SS |
| Peak Torque | 7.16 Nm (1013.94 Oz-In) |
| Frame Size | 80mm |
| Power | 0.75 kW |
| Shaft Seal | Yes |
| Inertia | Low |
| IP Rating | IP65 |
| H x W x D | 3.15 in x 3.15 in x 7.01 in |
| Weight | 8 lb 6 oz |
| Voltage | 220V AC |
| Rated Speed | 3000 RPM |
| Max Speed | 5000 RPM |
| Mounting | Flange Mount |
| Encoder Type | Absolute |
| Encoder Bit Resolution | 17 bit, 16 bit |
| Constant Torque | 2.39 Nm (338.45 Oz-In) |
| Brake | Yes |
In order to cater the diversified needs of our clients, we are engaged towards providing a wide range of Delta ECMA-CA0807SS Servo Drive.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand | Panasonic |
| Model Number | MCDLT35SF |
| Interface | Analog /Pulse, Modbus (RS485 /RS232) |
| Family Name | MINAS A6 |
| Series | A6SF series |
| Type | Multifunction type |
| Frame | C-Frame |
| Frequency Response | 3.2 kHz |
| Control Method | Position control, Velocity control, Torque control and Full-closed control |
| Safety Function | Yes |
| Supply Voltage | Single / 3-phase 200V |
| Dimension | 65 x 150 x 170mm (W x H x D) |
| Mass | 1.6 kg |
| Input Main Circuit Power | Single/3-phase 200 to 240V +10% -15% 50/60 Hz |
| Input Control Circuit Power | Single phase 200 to 240V +10% -15% 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| External scale feedback | A/B phase, homing signal differential input. Serial communication is also supported |
| Control signal Input | General purpose 10 inputs, function is selected by parameters |
| Control signal Output | General purpose 6 inputs, function is selected by parameters |
| Analog signal Input | 3 inputs (16-bit A/D 1 input, 12-bit A/D 2 inputs) |
| Analog signal Output | 2 outputs (Analog monitor 2 output) |
| Pulse signal Input | 2 inputs (Photo-coupler input, Line receiver input) |
| Pulse signal Output | 4 outputs (Line driver 3 output, open collector 1 output) |
| USB Communication function | USB interface to connect to computers for parameter setting or status monitoring |
| RS Communication | 11 for RS232, 1 n (Max 31) for RS485 |
| Modbus RTU Communication function | 1 n communication |
| Regeneration | Built-in regenerative resistor (external resistor is also enabled) |
| Control mode | Position control, Speed control, Torque control, Position/speed control, Position/Torque control etc |
4.5/5
Reviewed by 20 Users
Most Relevant Reviews